New

MHC+ BMW F80 M3 & F82/F83 M4 GTX Ultra Aggressive Undertray Add On In Pre Preg Carbon Fiber

$225.42 $112.71

  • SKU: AU0000151610
  • Product Category: Body, Exterior & Decals
  • Availability: In stock

Short Description.

Complete your GTX rear aero with the MHC+ GTX Ultra Aggressive Undertray Add On for the F80 M3 & F82/F83 M4, the lower section of...

  • Free Shipping Eligible & Easy Returns
  • Fast Delivery – Ships Within 24-48 Hours
  • 100% Quality Guarantee & Secure Checkout

Complete your GTX rear aero with the MHC+ GTX Ultra Aggressive Undertray Add On for the F80 M3 & F82/F83 M4, the lower section of the two-piece GTX rear diffuser system. Manufactured from 100% pre-preg (dry) carbon fibre, the undertray and corner sections extend the diffuser further underneath the vehicle for a far more substantial, track-inspired rear profile that balances the GTX front aero.

Please note: this is an add-on. The MHC+ BMW F80 M3 & F82/F83 M4 GTX Rear Diffuser is required and is sold separately, or buy both together as part of the complete MHC+ GTX Aero Kit.


Key Features

  • Lower undertray and corner add-on for the MHC+ GTX rear diffuser
  • Designed for the BMW F80 M3 & F82/F83 M4
  • Requires the MHC+ BMW F80 M3 & F82/F83 M4 GTX Rear Diffuser (sold separately)
  • Manufactured from 100% pre-preg (dry) carbon fibre
  • OEM-style 2×2 twill carbon weave
  • Deep high-gloss UV-resistant lacquer finish
  • Developed using full 3D chassis scanning and CAD engineering
  • Fits using OEM mounts, pre-applied adhesive tape and stainless steel screws
  • Assembles to the diffuser on the bench with supplied M6 hardware
  • 15-minute fit
  • Backed by MHC LDNs 3-year warranty

The Full GTX Rear Aero Appearance

Fitted beneath the GTX diffuser, the undertray and corners create:

  • A more substantial and purposeful rear profile
  • Enhanced visual depth underneath the vehicle
  • Improved balance with the GTX front splitter

Add It Now or Add It Later

The GTX system is modular by design. The undertray bolts to the diffuser with six supplied M6 bolts, with a further four holding the corner sections in place so you can run the diffuser on its own and add this whenever you are ready, without modifying anything you already own.


Fitment & Installation

Fits using: OEM mounting points, pre-applied automotive-grade adhesive tape and supplied stainless steel self-tapping screws, with supplied M6 nuts and bolts joining the sections together

Tools required items marked (supplied) are included in the box:

  • Drill
  • 2.5mm drill bit (supplied)
  • PZ2 driver bit (supplied)
  • 10mm socket and 10mm spanner M6 nuts and bolts, you need to hold both ends
  • 8mm socket rear bumper corner OEM fixings
  • Panel wipe or IPA and lint-free cloths (alcohol wipes supplied)

Time to fit: 15 minutes
Difficulty: Moderate pilot drilling required

Assemble the diffuser and undertray as a complete unit on the bench first, then fit it to the car. Aligning the faces of the corner sections with the arch is the alignment that matters most visually, so take your time o

Add a Review

Your email address will not be published. Required fields are marked *

Related Products