New

Nuke Performance Air Jack On Board 12V Compressor Kit, 13.8 BAR / 200PSI, 2.5 gallons

$356.89 $147.00

  • SKU: AU0000160165
  • Product Category: Tools, Hardware & Accessories
  • Availability: In stock

Short Description.

On board, 12v compressor kit with a 2.5 gallons (9.5l) air tank for the Nuke Performance Air Jack 90 C. Holds 13.8 BAR / 200...

  • Free Shipping Eligible & Easy Returns
  • Fast Delivery – Ships Within 24-48 Hours
  • 100% Quality Guarantee & Secure Checkout

On board, 12v compressor kit with a 2.5 gallons (9.5l) air tank for the Nuke Performance Air Jack 90 C. Holds 13.8 BAR / 200 PSI when filled.
This kit lets you use an onboard compressor and air tank for the low-pressure air jacks from Nuke Performance. The system is recommended for vehicles with a maximum weight of 1400kg / 3100lb if used with a 4-kit. This is the easiest way to change your tires on the drift track without bringing anything other than a fresh set of tires.

Includes a 2.5-gallon (9.5 liters) VIAIR air tank
Stealth series 12V VIAIR compressor
Luminated gauge with handy on/off switch
To be used with the Nuke Performance Air Jack 90C
Complete kit, ready for up to 1400kg / 3100lb

This kit uses a high-quality Stealth series 12V compressor and 2.5-gallon (9.5l) air tank from the well-known air suspension manufacturer VIAIR and is adapted with the needed connectors and hoses from Nuke Performance to give you a complete kit with everything you need for your installation. Combined with the low-pressure air jacks from Nuke Performance (available here) that only need 8 BAR / 120 PSI to lift a total of 402kg / 886lb each, this kit gives you the support you need both in the workshop, at the racetrack, or just for show.

Everything you need to lift your vehicle with you at all times, you only need 12V to lift the car up for easy tire changes, maintenance, or alignment.
The Air Jack On Board 12V Compressor Kit, 13.8 BAR / 200 PSI, 2.5 gallons includes everything you need for an easy installation. The 12V Stealth series compressor, combined with a sensor kit, fills the 2.5 gallons (9.5 liters) air tank within minutes up to its limit of 13.8 BAR / 200 PSI, which is ready to use when you pull the valve and raise the system. When the pressure is released, the on-board compressor lets you fill the air tank again, ready for its next lift.

Air Jack On Board 12V Compressor Kit Specifications
For more information about specifications, view the product document.

Air Jack compatibility Nuke Performance Air Jack 90 C
Air Tank connections 1/4 NPT
Air Tank capacity 9.46 liters (2.5 gallons)
Air Tank length 607.00mm (23.90″)
Air Tank depth 151.00mm (5.94″)
Air Tank height 193.50mm (7.62″)
Air Tank connectors 1/4 NPT
Compressor model VIAIR 485C Gen.2
Compressor type 12-Volt
Compressor motor Permanent magnetic motor
Compressor max pressure 13.8 BAR (200

Add a Review

Your email address will not be published. Required fields are marked *